Setting up a Brick Paver Walkway or Brick Patio Installation

The usage of Bricks or Pavers to produce a walkway or patio complements a home in a way that is unrivaled. In addition, setting up a Brick or Paver sidewalk does not always need a pro.

The key to installing a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. In addition, string lines must be strung on each side of the pathway.
Once the area has actually been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline should equate to the thickness of the brick or paver.

Now that you have a steady base, put a 1" pipe or journal board the length of the walkway on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will act as your pathway border and assistance to keep the integrity and shape of the sidewalk. You can get these plastic strip borders at many house improvement stores. The strips ought to be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.

Once this is done, you can then start to lay the bricks/pavers. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the stability of the walkway.

Undoubtedly bricks/pavers will require to be cut or split when building the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a more info 75 degree angle over the area where you desire to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop up the outside edges with additional sand, and after that shovel in the topsoil and load down firmly.
Lastly, spread stone dust over the brand-new walkway and sweep into the fractures. Repeat this procedure a number of times to ensure the cracks are totally filled. This will complete the interlocking of the bricks and help to remove any weed growth. Just add yard seed to the outdoors edges and you ought to have a gorgeous entryway to your home within a couple of weeks.


In addition, installing a Brick or Paver sidewalk does not necessarily need a pro. The key to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipeline or ledger board the length of the sidewalk on either side of the walkway. These strips will act as your pathway border and aid to keep the stability and shape of the sidewalk. Inevitably bricks/pavers will need to be cut or split when constructing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *